MX1A-D1NA
ActiveCherry MX Grey Tactile ~80g (MX1A-D1NA)
Cherry MX Nature White — mid-weight linear between Red and Black.
Common Applications
55g spring — the middle ground between Red (45g) and Black (60g). Introduced specifically because the community asked for it. Sometimes called Milk or Natural White. Found in some Varmilo and Ducky keyboards.
Research Notes
1. Overview
The Cherry MX1A-D1NA is a genuine Cherry MX key module — the MX Grey tactile switch (Cherry's own part code, distributor kit DMX1A-D1NA-1A, marketed as "CHERRY MX GREY"). It is a stiff tactile switch with a grey stem, ~80 cN actuation, historically used as a high-force spacebar/stabilized-key switch and prized by typists who want a heavy, deliberate tactile bump. It is a standard MX-footprint switch (5-pin/plate or PCB mount depending on model), compatible with MX-style keycaps.
2. User Sentiment
Enthusiasts describe MX Grey (tactile) as "robust and noticeable" — a heavier cousin of the MX Clear, with a pronounced tactile event and high spring weight that resists accidental presses. It is niche: fans use it for spacebars or full heavy-tactile boards, while others find ~80 g fatiguing for everyday typing. Frequently compared to MX Clear (lighter tactile) and to the linear MX Grey/Black.
3. Real-World Applications
Mechanical keyboards and keypads where a heavy tactile switch is wanted — spacebars, stabilized modifiers, industrial/point-of-sale keypads, and accessibility builds that benefit from high actuation force to prevent mis-presses.
4. Technical Specifications
- Type: Tactile mechanical keyswitch (Cherry MX Grey)
- Stem color: Grey
- Actuation force: ~80 cN (80 g); tactile bump
- Travel: 2.0 mm to actuation, 4.0 mm total
- Rated life: Cherry MX class (≥50 million actuations; newer RGB production up to 100 M)
- Mount/footprint: standard Cherry MX; MX-compatible keycaps
5. Ordering & Compatibility
Sold as Cherry key modules / switch kits (Mouser, DigiKey DMX1A-D1NA-1A, RS). Standard MX footprint, so it drops into MX hot-swap sockets or gets soldered like any MX switch. Pair with a heavier spacebar or full heavy-tactile layout; MX Grey linear is the linear counterpart under a different code.
6. Known Issues
No notable reliability issues — it is a standard Cherry MX mechanism. The main caveat is ergonomic: ~80 g is heavy for sustained typing, so it is usually chosen deliberately for specific keys rather than a whole board.
3 sources
- DMX1A-D1NA-1A CHERRY (MX Grey switch kit) — mouser.com
- SWITCH KITS CHERRY MX GREY (DMX1A-D1NA-1A datasheet) — digikey.com
- Cherry MX - Deskthority wiki (switch code table) — deskthority.net
Specifications
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
~80cN (80g)
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Grey stem
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
50,000,000+ cycles (Cherry MX)
|
|
Mount
|
Standard Cherry MX footprint
|
|
Switch type
|
Tactile
|
|
Travel Distance
How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.
|
2mm actuation, 4mm total
|
Installation Quick Reference
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Troubleshooting
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Where to Buy
Price range
$65.56 — $136.41
across 2 sellers in US dollars
Quick Specs
- Actuation Force
- ~80cN (80g)
- Color
- Grey stem
- Mechanical Life
- 50,000,000+ cycles (Cherry MX)
- Mount
- Standard Cherry MX footprint
- Switch type
- Tactile
What People Are Saying
“55g spring — the middle ground between Red (45g) and Black (60g). Introduced specifically because the community asked for it. Sometimes called Milk or Natural White. Found in some Varmilo and Ducky ke”
Learn More
More from Cherry
Cherry
80RETROS X HMX 1989 CLASSIC 45G LINEAR PCB MOUNT SWITCHES 35
80Retros x HMX 1989 Classic 45g Linear PCB Mount Switches 35 Pack
Cherry
80RETROS X HMX FJ400 50G LINEAR PCB MOUNT SWITCHES 35 PACK
80Retros x HMX FJ400 50g Linear PCB Mount Switches 35 Pack
Cherry
80RETROS X HMX JOKER 45G LINEAR PCB MOUNT SWITCHES 35 PACK
80Retros x HMX Joker 45g Linear PCB Mount Switches 35 Pack