KT50-BLU2
ActiveK50 Touch Button with IO-Link
Turck K50 capacitive touch button — no moving parts.
Common Applications
Capacitive touch sensor in a standard K50 housing — no mechanical button to wear out. Works through gloves up to 3mm. IP69K rated for food and pharma washdown. IO-Link enabled for smart factory integration. The next generation of industrial push buttons — no moving parts means unlimited cycle life.
Research Notes
1. Overview
The Turck KT50-BLU2 is a 50 mm capacitive touch button with integrated LED illumination and IO-Link communication, belonging to Turck's K50 family — a joint product line from Turck's partnership with Banner Engineering (sold as Banner K50 in the US market, rebranded as KT50 under Turck part numbers in Europe and globally). The "T" in KT50 denotes touch (as opposed to plain K50L indicator variants), and "BLU2" indicates blue illumination with a 2-wire output configuration. This is definitively a TOUCH BUTTON — an operator input device with capacitive-sensing actuation plus visual indication — not a passive indicator. The K50 platform was designed to replace mechanical pushbuttons with a zero-wear solid-state alternative for pick-to-light, assembly guidance, and call-button applications.
2. User Sentiment
No direct user reviews specific to the KT50-BLU2 part number were found, but the broader K50 Pro touch button platform receives consistent praise from integrators and end users. A DigiKey TechForum thread highlights that the device "combines a multicolor indicator, a capacitive touch sensor, and haptic feedback" and significantly simplifies PLC code by offloading animation timing to the device itself — eliminating timer-based ladder logic. Users working with Banner K50 Pro on Schneider Modicon PLCs report straightforward Modbus integration. The solid-state design and unlimited rated lifespan (no moving parts) are frequently cited advantages over conventional pushbuttons. The adjustable touch sensitivity is noted as essential in washdown environments to avoid false triggers from water jets and cleaning agents. No significant negative feedback was found for the K50 touch button family.
3. Real-World Applications
The K50 / KT50 touch button is heavily deployed in pick-to-light systems across automotive assembly, electronics production, and intralogistics. SAS Automotive Systems deployed K50 signal lights in 20 mounting stations at their Zwickau facility for cockpit assembly at a rate of 1 cockpit per minute, with workers acknowledging picks via touch button and the system reducing assembly errors measurably. Turck reports logistics deployments where pick-to-light with K50 buttons accelerated manual order picking by over 60%. Additional documented applications include warehouse management system integrations, bumper assembly lines, cascaded operator guidance displays, and food and beverage production where FDA-grade housing variants are specified. The ECOLAB certification on the KT50-BLU2 makes it suitable for pharmaceutical and food processing environments with aggressive chemical washdowns.
4. Technical Specifications
- Type: Capacitive touch button (TOUCH BUTTON — operator input + illuminated indicator, NOT a plain indicator)
- Illumination Color: Blue (BLU suffix); RGB programmable models also available in K50 family
- Supply Voltage: 18–30 V dc (24 V dc nominal); some K50 Core variants extend to 12–30 V dc
- IP Rating: IP69K (also IP66/IP67); rated for high-pressure, high-temperature washdown
- Connector: 4-pin M12 Integral Quick Disconnect (QD); some Pro variants use 5-pin M12 with M30 threaded base
- Housing Material: Polycarbonate
- Touch Technology: Capacitive sensing — detects touch through bare hands and gloved hands; no physical pressure required
- IO-Link: Yes — enables full LED color/animation control, automatic parameter reload on replacement, process data access
- Communication Options: IO-Link, Modbus RTU (PICK-IQ protocol for low-latency pick-to-light networks)
- Output: Solid-state switching (NPN or PNP NO/NC depending on variant); 2-wire output on BLU2
- Haptic Feedback: Available on K50 Pro variants — vibration confirmation through gloves
- Operating Temperature: -40°C to +50°C
- Certifications: UL, CE, ECOLAB
- Lifespan: Unlimited rated (no moving parts)
- Size: 50 mm dome; overall ~50 × 66 mm
5. Ordering & Compatibility
The Turck KT50-BLU2 is available through Turck's global distribution network and industrial automation distributors. The equivalent Banner Engineering part for the IO-Link multicolor touch version is K50PTKQ (part 806180), priced at approximately $224 USD list; the non-touch IO-Link indicator K50L2RGBKQ lists at approximately $144 USD. Accessories include the 2170-PRO-KIT programming cable for Pro Editor software configuration via USB, protective guards (polycarbonate touch guards against accidental actuation), and M12 cordsets. The K50 platform is backward-compatible across Pro generations via "Pro ID" technology. Related Turck part numbers in the K50 family include plain indicators (K50L series), touchless optical buttons (K50 Pro Optical), and flat-design variants (K50 Flat, 17 mm height) for space-constrained installations.
6. Known Issues
Touch sensitivity calibration is the primary field concern — in high-pressure washdown environments with chemical detergents, the capacitive sensor can produce false triggers if sensitivity is set too high; adjustable sensitivity settings mitigate this. No reports of fundamental reliability failures were found. Some integrators note the need for Pro Editor software for full RGB/animation programming, adding a tooling requirement. The product is not typically stocked in high volumes at distributors under the Turck KT50-BLU2 part number (it appears primarily in Turck's European and global catalog), though the identical Banner K50PTKQ is widely available in North America.
14 sources
- Turck Push Buttons & Components | The Button Index — thebuttonindex.com
- K50PTKQ Banner Engineering K50 Pro Touch with IO-Link Series — walkerindustrial.com
- Programming the Banner K50 Pro Series Multicolor Touch Button - DigiKey TechForum — forum.digikey.com
- K50L2RGBKQ - K50 IO-Link Series: 7-color RGB General Purpose Indicator — walkerindustrial.com
- Banner Engineering: K50 Programmable Indicators and Touch Buttons - Panel Builder US — panelbuilderus.com
- K50 Pro Touch Buttons Compatible with Pro Editor Software - Turck Banner UK — turckbanner.co.uk
- LED Technology - K50 Flat - TURCK BANNER LTD. — turckbanner.co.uk
- Pick-to-Light for Bumper Assembly - TURCK BANNER LTD. — turckbanner.co.uk
- Turck Pick-to-Light for assembly and picking applications — tipteh.com
- Banner Adds IO-Link and Modbus to K50 Programmable Indicators and Buttons — control.com
- Banner Engineering Lighting and Indicators: Touch Buttons — afs.gogcg.com
- K50PTKQ | Products for Industrial Automation - Banner Engineering — bannerengineering.com
- K50PTKQ | TURCK - Your Global Automation Partner — shop.turck.nl
- K50 Programmable Indicators, Touch, and Touchless Buttons - Banner Engineering — bannerengineering.com
Specifications
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CE, ECOLAB
|
|
IP Rating
IP69K: Dust-tight and withstands high-pressure, high-temperature steam jets. Built for food processing washdown environments.
|
IP69K
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
Unlimited (no moving parts)
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
M30 threaded
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
IO-Link
|
|
Voltage
|
10-30V DC
|
Installation Quick Reference
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Troubleshooting
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Where to Buy
Price range
$37.65 — $59.51
across 2 sellers in US dollars
Quick Specs
- Certifications
- UL, CE, ECOLAB
- IP Rating
- IP69K
- Mechanical Life
- Unlimited (no moving parts)
- Mounting Type
- M30 threaded
- Protocol
- IO-Link
What People Are Saying
“No moving parts means unlimited life and IP69K washdown rating. The future of industrial HMI. IO-Link gives you smart diagnostics too.”