Keygeek Jasmine Green Tea V2m is back with improvements due to its popularity in the Chinese enthusiast circle. New featuring a new mold, a mix of different Nylon blended housings, and L4+ stem. Sound Profile: Deep, Rich, Smooth Keygeek Jasmine Green Tea V2m Switches Feature: 18 included in each pack Linear Top Housing: PA66 Nylon Bottom Housing: N1 Nylon Stem: L4+, Extended Spring: 22mm, Single-stage Actuation: 43g Bottom-out: 53g Pre-travel: 1.8mm Total Travel: 3.8mm 5-Pin, PCB Mount MX Structure Lubed Price: $0.35 per switch Includes: 18 Keygeek Jasmine Green Tea V2m Switches
Research Notes
1. What this is
Keygeek Jasmine Green Tea V2m Linear Switches is a mechanical keyboard switch from Keygeek. It is linear.
2. Spec decode (from product name)
- Switch type: linear
3. Compatibility & use
Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.
4. Data-quality note
The switch type is decoded from the name; the exact actuation force and mount should be confirmed against the manufacturer's spec. Flagged decoded-partial. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)
5. Sources
- Keygeek product page / keyboard-switch community databases
- Distributor / vendor listing — search the exact switch name
1 source
- Keygeek Keygeek Jasmine Green Tea V2m Linear Switches — keyboard-switch spec
Specifications
|
Device class
|
mechanical keyboard switch
|
|
Enriched by
|
keyboard-decoder-2026-08-12
|
|
Pn status
|
decoded-partial
|
|
Product type
|
Switches
|
|
Series description
|
Keygeek mechanical keyboard switch (linear)
|
|
Shopify id
|
7683558408257
|
|
Switch type
|
linear
|
|
Vendor
|
Keygeek
|
Installation Quick Reference
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Troubleshooting
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Quick Specs
- Device class
- mechanical keyboard switch
- Enriched by
- keyboard-decoder-2026-08-12
- Pn status
- decoded-partial
- Product type
- Switches
- Series description
- Keygeek mechanical keyboard switch (linear)
