Mitsubishi Electric · GOT2000 Series

GT2507-WTSD

Active
UL CE C-TICK

GOT2000 7-inch HMI Touch Panel

Mitsubishi Electric GOT2000 Series Introduced circa 2015

Mitsubishi GOT2000 7-inch touchscreen HMI.

Common Applications

Mitsubishis standard HMI for MELSEC PLC systems. Replaces physical buttons with virtual touchscreen controls. GT Designer3 software for configuration. Found on Mitsubishi-controlled packaging, automotive, and semiconductor equipment in Japan and Asia.

Research Notes

1. Overview

The Mitsubishi Electric GT2507-WTSD is a 7-inch GOT2000 (GT25 series) graphic operation terminal (HMI) — a wide TFT color resistive touchscreen (65,536 colors, 800×480-class) with built-in Ethernet, serial (RS-232/422/485), USB, and an SD card slot, plus CC-Link connectivity. It's programmed with Mitsubishi's GT Works3 / GT Designer3 and pairs with MELSEC PLCs (and third-party controllers). IP67 front, panel-mount, UL/CE. The GOT2000 is Mitsubishi's high-performance HMI line.

2. User Sentiment

GOT2000 terminals are well regarded in Mitsubishi-based automation for performance, rich connectivity, and deep MELSEC integration (features like device monitoring, backup/restore, and FA transparent access to the PLC). Considerations: it's tied to the Mitsubishi/GT Works3 ecosystem, it's touch-only (resistive), and version/firmware matching with the PLC project matters. Wide 7" fits compact machine panels.

3. Real-World Applications

Machine-level operator interface for Mitsubishi MELSEC (FX/Q/L/iQ-R) PLC systems — status/HMI screens, setpoints, alarms, recipes, trends, and (via GOT features) PLC program transfer/monitoring through the panel.

4. Technical Specifications

  • Type: GOT2000 GT25 HMI terminal, 7" wide TFT color resistive touchscreen
  • Interfaces: Ethernet, serial RS-232/422/485, USB, SD card, CC-Link
  • Software: GT Works3 / GT Designer3
  • Mounting: panel mount; IP67 (front)
  • Approvals: UL, CE, c-Tick

5. Ordering & Compatibility

Pairs with Mitsubishi MELSEC PLCs (and supported third-party PLCs); programmed in GT Works3. Confirm GT Works3/firmware compatibility with the controller project and the required interfaces (Ethernet vs serial). GOT2000 GT25 offers other sizes (5"/10"/12"/15") and variants.

6. Known Issues

No notable reliability issues. Practical notes: Mitsubishi-ecosystem oriented (GT Works3 required), touch-only (no physical function keys on this model), and firmware/software versions should match the PLC project. Standard HMI cautions (backlight lifetime, panel-cutout sealing) apply.


2 sources
  1. Mitsubishi GOT2000 GT2507-WTSD 7-inch HMI — mitsubishielectric.com
  2. Mitsubishi GT2507-WTSD GOT2000 7-inch touchscreen HMI — mouser.com

Specifications

Certifications
UL, CE, c-Tick
Config software
GT Works3 / GT Designer3; pairs with MELSEC PLCs
Display
7in wide TFT color resistive touchscreen, 65536 colors
Input
Touchscreen only (resistive)
IP Rating
IP67 (front)
Mounting Type
Panel mount
Protocol
CC-Link, Ethernet, RS-232/422/485
Series
Mitsubishi GOT2000 GT25

Installation Quick Reference

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensions

Troubleshooting

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Where to Buy

Price range

$27.78 — $140.49

across 2 sellers in US dollars

Quick Specs

Certifications
UL, CE, c-Tick
Config software
GT Works3 / GT Designer3; pairs with MELSEC PLCs
Display
7in wide TFT color resistive touchscreen, 65536 colors
Input
Touchscreen only (resistive)
IP Rating
IP67 (front)

What People Are Saying

+

“Mitsubishis standard HMI for MELSEC PLC systems. Replaces physical buttons with virtual touchscreen controls. GT Designer3 software for configuration. Found on Mitsubishi-controlled packaging, automot”

Reddit r/PLC 7 upvotes View thread →