GAA610BJ1
ActiveGen2 Car Operating Panel Button
Otis Gen2 car operating panel floor selection button.
Common Applications
The floor selection buttons inside Otis Gen2 elevator cars. Pressed millions of times per year in high-traffic buildings. LED illuminated, Braille floor numbers, tactile feedback. Designed for 20+ year service life with minimal maintenance.
Research Notes
1. Overview
The Otis GAA610BJ1 is an OEM Otis Elevator PCB board component bearing the company's internal GAA-prefix part numbering. The "GAA610" prefix is confirmed, across multiple independent parts databases, to designate a family of electronic PCB sub-assemblies used inside Otis elevator control systems — not physical push buttons or fixture hardware. The GAA610 family spans at least 15+ known variants covering motion control boards, signal interface boards, load weighing boards, door control boards, hall operating boards (HOB), and serial interface boards. The specific suffix "BJ1" was not found in any publicly accessible parts list, Chinese marketplace, or North American reseller catalog, making the exact function of this variant unverifiable from public sources.
2. User Sentiment
No user reviews, forum discussions, or field reports specifically mentioning the GAA610BJ1 were found anywhere across the researched sources. The broader GAA610 board family is treated in elevator maintenance communities as standard Otis OEM PCB inventory — boards that are replaced rather than repaired, sourced through Otis directly or authorized distributors. One North American forum (vatortrader.com) discusses Otis BJ-designated selectors in a vintage mechanical context (6850 BJ selector), unrelated to the GAA610 electronic board family. No comparative ratings or user experience data exist for this part in public channels.
3. Real-World Applications
Known GAA610 variants are used across multiple Otis elevator platform generations: the Gen2 (GEN2) platform uses GAA610ZC1 as the HOB (Hall Operating Board) PCB for landing button panels; the OH5000 uses XAA610W1 (AMCB2 motion control); Otis GECB2-based systems use GAA610AFY1 as a sub-board; and load-weighing systems across multiple Otis platforms use GAA610AAR1. The GAA610BJ1 would follow the same pattern — a board embedded within a specific Otis elevator subsystem (controller cabinet, car panel, or landing station), deployed in commercial/institutional building elevators where Otis is the OEM.
4. Technical Specifications
- Type: PCB electronic board sub-assembly (Otis OEM part, GAA610 family)
- Manufacturer: Otis Elevator Company (OEM)
- Part number prefix: GAA610 (Otis internal global part numbering; GAA = global/original production)
- Family function range: Signal interface boards, motion control boards, serial interface boards, load weighing boards, hall operating boards, door control boards
- Specific BJ1 function: Not confirmed from public sources; unverifiable without OEM documentation
- Format: PCB sub-assembly (not a standalone button or physical fixture)
- Availability: OEM-only; not listed on Made-in-China.com, not in elevatorvip.com's 1,150-entry Otis database, not in Access Electronics North American inventory
5. Ordering & Compatibility
GAA610BJ1 is not listed on any publicly accessible parts marketplace (Made-in-China.com returned "no results"; major Chinese elevator parts resellers do not carry it). As an OEM part, it would be sourced through Otis directly (Otis spare parts ordering: North America +1-800-600-6847) or through an authorized Otis distributor such as UNITEC Parts (+1-800-328-7840, info@unitecparts.com) or ADAMS Elevator. Pricing is not available from any public source. Compatible elevator systems would depend on the BJ1 variant's specific function — likely one specific Otis platform generation. The GAA610 prefix is shared with boards for Gen2, OH5000, GECB2-based systems, and older homegrown platforms.
6. Known Issues
No field issues, failure modes, or service bulletins for the GAA610BJ1 were found in any public forum or technical document. GAA610-family boards in general are treated as replacement parts rather than reparable components, with aftermarket equivalents (XAA-prefix variants) available for some board types from Chinese suppliers. The lack of any listing for GAA610BJ1 in Chinese B2B markets or third-party resellers suggests this specific variant may be discontinued, extremely low-volume, or restricted to Otis's internal service channel.
10 sources
- Otis Parts List PDF (Chinese-language parts catalog) — pdfcoffee.com
- OTIS Elevator Parts List — ElevatorVIP (1,150 entries) — elevatorvip.com
- GAA25005G1 GAA610ZC1 Otis Elevator HOB PCB Board for GEN2 Landing Push Buttons — elevatorvip.com
- GAA29502D3 GAA26800RF3 GAA610AFY1 Otis Elevator GECB2_LV Board — elevatorvip.com
- Elevator Parts LWB-II Elevator Weighing Control Board PCB GBA26800KJ1 GAA610AAR1 for OTIS Elevator — hqlifts.com
- XAA610W1 OTIS Elevator AMCB2 Motion Control Board V4.6M/2.0/1.0 for OH5000 — elevatorvip.com
- GAA610BJ1 search — Made-in-China.com (no results found) — made-in-china.com
- GAA25005B1 GAA25005B2 Otis Elevator RS14 Board GAA610XB1 — elevatorvip.com
- Access Electronics — Otis Elevator Circuit Boards Inventory — elevatorcircuitboards.com
- OTIS 6850 BJ Selector Crash — Elevator Forum (context: BJ designation in Otis) — vatortrader.com
Specifications
|
ADA Compliant
Meets Americans with Disabilities Act requirements for accessible design.
|
Yes
|
|
Braille Compatible
Whether the button has Braille markings for visually impaired users. Required by ADA in the US.
|
Yes
|
|
Illumination
Whether the button has a built-in light. Illuminated buttons show status (lit = active).
|
LED backlit
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Stainless Steel
|
|
Pn notes
|
Otis GAA610BJ1 is a PCB CONTROL BOARD family (motion/signal/door control), NOT a button. Candidate for removal/reclassify. (The real Otis button family is GAA25090 = product #167.)
|
|
Pn status
|
out-of-scope
|
|
Vandal Rating (IK)
IK rating for impact resistance. IK09 = 10 joules (hammer blow). IK10 = 20 joules (serious vandalism). Higher is tougher.
|
IK08
|
Installation Quick Reference
Installation: Professional elevator technician required. Must comply with local elevator codes (ASME A17.1 / EN 81). Braille plates must be positioned per ADA requirements (48" max height for side reach).
Dimensions
Troubleshooting
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Where to Buy
Price range
$26.27 — $32.82
across 2 sellers in US dollars
Quick Specs
- ADA Compliant
- Yes
- Braille Compatible
- Yes
- Illumination
- LED backlit
- Material
- Stainless Steel
- Pn notes
- Otis GAA610BJ1 is a PCB CONTROL BOARD family (motion/signal/door control), NOT a button. Candidate for removal/reclassify. (The real Otis button family is GAA25090 = product #167.)
What People Are Saying
“The floor selection buttons inside Otis Gen2 elevator cars. Pressed millions of times per year in high-traffic buildings. LED illuminated, Braille floor numbers, tactile feedback. Designed for 20+ yea”