E30EA

Active

Eaton E30EA Push Button Operator

Eaton E30EA — Eaton E30EA Push Button Operator

Eaton E30EA Push Button Operator The Eaton E30EA is a push button operator with a voltage rating of 120VAC. It features with two button actuator type and it is used for electrical assemblies, panels and EOEMs applications.

Research Notes

1. What this is

E30EA is an Eaton E30 30.5mm HEAVY-DUTY modular command device (Cutler-Hammer heritage; E30K* = collar/operator/contact components for 30.5mm control).

2. Part-number decode

  • Series: E30
  • Panel cutout: 30.5mm
  • Type: operator/collar/block
  • Construction: modular (operator, contact block(s), and mounting are separate parts)

3. Compatibility & ordering

Eaton's M22 (RMQ-Titan, 22mm) and E30 / 10250T (30.5mm heavy-duty) are its principal command-switch ranges. As an M22/E30 modular device, the operator/actuator, the contact or LED block(s), and the mounting adapter are ordered separately — a common ordering error is assuming a stored contact is included. Confirm you have all the pieces for a complete device. Match by size (22 / 30.5mm), function (pushbutton/selector/indicator/E-stop), color, illumination, and contact arrangement; cross-reference to Schneider Harmony, Allen-Bradley 800F/800T, Siemens 3SU, or IDEC HW by the same attributes if needed.

4. Data-quality note

The Eaton series, size, and component type are decoded from the part number (grounded in Eaton's Vol.7 catalog and distributor listings). The exact color and contact arrangement depend on the remaining digits and the sub-family — confirm against the Eaton datasheet for a precise order (not guessed here).

5. Sources

  • Eaton control-components catalog (Vol.7) / RMQ-Titan M22 & 10250T (eaton.com)
  • Distributor listing (Newark / Mouser) — search the exact part number

1 source
  1. Eaton — E30EA — eaton.com

Specifications

Component type
operator/collar/block
Enriched by
eaton-decoder-2026-08-12
Manufacturer series
E30
Modular
true
Panel cutout
30.5mm
Pn status
decoded
Product type
Push Button Operator
Series description
Eaton E30 30.5mm HEAVY-DUTY modular command device (Cutler-Hammer heritage; E30K* = collar/operator/contact components for 30.5mm control)
Shopify id
8348776923449
Vendor
Eaton

Installation Quick Reference

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensions

Troubleshooting

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Photos & Drawings

Images: cdn.shopify.com

Where to Buy

Price range

$377.0 — $377.0

from 1 seller in US dollars

Quick Specs

Component type
operator/collar/block
Enriched by
eaton-decoder-2026-08-12
Manufacturer series
E30
Modular
true
Panel cutout
30.5mm