E22TB2X27

Active

Eaton Electrical E22TB2X27

Eaton Electrical E22TB2X27 — Eaton Electrical E22TB2X27

Pushbutton Switches PRSTST 120V/XFR BKBZ R 1NO1NC

Research Notes

1. What this is

E22TB2X27 is an Eaton E22 economy 22mm command switch / contact element (compact 22mm control device).

2. Part-number decode

  • Series: E22
  • Panel cutout: 22mm

3. Compatibility & ordering

Eaton's M22 (RMQ-Titan, 22mm) and E30 / 10250T (30.5mm heavy-duty) are its principal command-switch ranges. This is a complete/integrated device. Match by size (22 / 30.5mm), function (pushbutton/selector/indicator/E-stop), color, illumination, and contact arrangement; cross-reference to Schneider Harmony, Allen-Bradley 800F/800T, Siemens 3SU, or IDEC HW by the same attributes if needed.

4. Data-quality note

The Eaton series/family is identified; the exact configuration (color, contact, function) is left to the Eaton datasheet rather than guessed. Flagged decoded-partial.

5. Sources

  • Eaton control-components catalog (Vol.7) / RMQ-Titan M22 & 10250T (eaton.com)
  • Distributor listing (Newark / Mouser) — search the exact part number

1 source
  1. Eaton — E22TB2X27 — eaton.com

Specifications

Device class
pushbutton
Enriched by
eaton-decoder-2026-08-12
Lead time
183 Days
Manufacturer series
E22
Mouser part number
504-E22TB2X27
Panel cutout
22mm
Pn status
decoded-partial
Rohs status
Series description
Eaton E22 economy 22mm command switch / contact element (compact 22mm control device)

Installation Quick Reference

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensions

Troubleshooting

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Photos & Drawings

Images: mouser.com

Quick Specs

Device class
pushbutton
Enriched by
eaton-decoder-2026-08-12
Lead time
183 Days
Manufacturer series
E22
Mouser part number
504-E22TB2X27