CS-LAVENDER-PURPLE
ActiveAkko CS Lavender Purple Tactile 36g
Akko CS Lavender Purple — ultra-light tactile switch.
Common Applications
Lightest tactile switch on the market at 36g. For people who want to feel the tactile bump without any finger fatigue. Popular with typists who have RSI or joint issues. The light spring also makes it good for rapid actuation in gaming.
Research Notes
1. Overview
The Akko CS Lavender Purple (Custom Series) is a light-to-medium tactile MX-style mechanical keyswitch — a gentle tactile bump with a light ~36 gf actuation force, 2 mm actuation / 4 mm total travel, and a purple stem. It's one of Akko's popular budget switches, factory-lubed and MX keycap compatible (hot-swap friendly). Unlike some of its CS siblings (Matcha Green, Rose Red, Ocean Blue) that use progressive springs, the Lavender Purple uses a standard spring for a lighter, straightforward tactile feel.
2. User Sentiment
Well liked as an affordable light tactile — the soft bump and light weighting suit typists who want feedback without heavy force, and it's a common value pick for custom builds. As a budget switch the usual caveats apply (stock consistency/lube are good-for-the-price rather than premium), but reviewers generally rate it a pleasant, easy tactile.
3. Real-World Applications
Custom and enthusiast mechanical keyboards — a light tactile choice for typing-focused or mixed-use builds in standard MX hot-swap or soldered boards.
4. Technical Specifications
- Type: Tactile, MX-style mechanical
- Actuation force: ~36 gf (tactile bump peak higher)
- Travel: 2 mm actuation, 4 mm total
- Life: ~80 million actuations (per Akko listing)
- Stem/color: purple stem
- Spring: standard (not progressive — contrast Matcha/Rose/Ocean CS switches)
- Mount: MX-compatible, 5-pin (hot-swap compatible); factory-lubed
5. Ordering & Compatibility
Sold in packs (e.g. 45 pcs) by Akko and keyboard retailers. Fits standard MX hot-swap or solder PCBs and MX keycaps. Part of Akko's CS/V3 switch family (linears like Cream Yellow, other tactiles). Note Akko's magnetic/HE switches are a separate line — this is a standard contact tactile.
6. Known Issues
No major reliability issues. Practical notes: it's a light tactile (subtle bump — those wanting a stronger bump should look elsewhere in Akko's range), budget-tier lube/consistency, and it's an MX contact switch (needs a normal MX PCB, not a Hall-effect board).
2 sources
- Akko CS Lavender Purple Switch (tactile) — akkogear.com
- Akko CS Lavender Purple — light/medium tactile — keebworks.com
Specifications
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
36g
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Purple stem
|
|
Keycap compat
|
MX-compatible, 5-pin hot-swap
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
80,000,000 cycles
|
|
Switch type
|
Tactile (MX-style contact, factory-lubed)
|
|
Travel Distance
How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.
|
2mm actuation, 4mm total
|
Installation Quick Reference
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Troubleshooting
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Where to Buy
Price range
$80.65 — $146.51
across 2 sellers in US dollars
Quick Specs
- Actuation Force
- 36g
- Color
- Purple stem
- Keycap compat
- MX-compatible, 5-pin hot-swap
- Mechanical Life
- 80,000,000 cycles
- Switch type
- Tactile (MX-style contact, factory-lubed)
What People Are Saying
“Lightest tactile switch on the market at 36g. For people who want to feel the tactile bump without any finger fatigue. Popular with typists who have RSI or joint issues. The light spring also makes it”
Learn More
More from Akko
Akko
BOTANY 38G LINEAR PCB MOUNT SWITCHES 45 PACK
Akko Botany 38g Linear PCB Mount Switches 45 pack
Akko
CREAMY BLACK PRO 55G LINEAR PCB MOUNT SWITCHES 45 PACK
Akko Creamy Black Pro 55g Linear PCB Mount Switches 45 Pack
Akko
CREAMY BLUE PRO V3 45G TACTILE PCB MOUNT SWITCHES 45 PACK
Akko Creamy Blue Pro V3 45g Tactile PCB Mount Switches 45 Pack