Kailh · Choc V1 Series

CPG1511-WHITE

Active

Kailh Choc V1 White Clicky Low-Profile

Kailh Choc V1 Series Introduced circa 2018

Kailh Choc V1 low-profile clicky switch.

Common Applications

Clicky version of the Choc low-profile switch. Audible click in a slim 3mm travel package. Used in slim keyboards that want tactile+audible feedback.

Research Notes

1. Overview

The Kailh BOX White is a light clicky mechanical keyboard switch from Dongguan Kaihua Electronics, part of the BOX series first introduced around 2017. It belongs to the CPG1511 family — Kailh's internal mold code covering all BOX-format switches — and sits at the lightest end of the BOX clicky hierarchy alongside the BOX Brown (tactile sibling). The defining feature of the BOX series is a dust- and water-resistant enclosure (IP56 rated) that surrounds the cross-stem housing, isolating the contact mechanism from particulates. The BOX White uses a metal click-bar mechanism rather than a click jacket, producing a distinct click event on both downstroke and upstroke. A revised V2 version launched in fall 2018 correcting a stem-dimension defect from V1 production.


2. User Sentiment

Community reception is broadly positive, with most users rating the BOX White as a substantial upgrade over Cherry MX Blue or Kailh Blue (click-jacket) predecessors. KeebWorks scored it 34/50 (68%), highlighting smoothness and sound, but noting off-center scratchiness and inconsistent click-to-actuation alignment. Users on RGBKeys describe the V2 as "tighter and more stable than the old BOX White" with "exactly the crispy click I want, without sounding shrill." The switch is frequently recommended as "the single best introduction to click-bar feel" (MKBGuide 2026). Common complaints: it is too loud for quiet office environments, the double-click-per-keystroke mechanic surprises some users, and V1 units (pre-fall 2018) carried a significant stem-cracking risk with premium keycaps. The V2 is considered a clean resolution of those V1 concerns.


3. Real-World Applications

The BOX White is positioned for daily typing and mixed typing/gaming use where moderate clicky feedback is desired without the heavy actuation of BOX Jade or Navy variants. Its IP56 rating (V1) or IP54 (V2) makes it appropriate for industrial keyboard builds, ruggedized terminals, or dusty/humid environments. It is used in consumer custom mechanical keyboards via group buys and hot-swap boards. MKBGuide notes it as a "fallback when preferred heavy variants face stock constraints." Not recommended for noise-sensitive shared workspaces due to audible click on both key-down and key-up.


4. Technical Specifications

  • Type: Clicky — click-bar mechanism (metal bar, not click jacket); clicks on downstroke AND upstroke
  • Official Part Numbers: CPG1511F01S02 (Kailh.net, 3-pin) / CPG1511F01S03 (kailh.com, JLCPCB); "CPG1511-WHITE" is a catalog/retail slug, not a Kailh-issued PN
  • Actuation Force: 45 ± 15 gf (sources range 45–50 gf depending on revision; Kailh official spec 45±15 gf)
  • Tactile/Peak Force: 55 ± 10 gf (some sources cite 55–60 gf bottom-out)
  • Pre-travel: 1.8 ± 0.3 mm (V2: ±0.4 mm)
  • Total Travel: 3.6 ± 0.3 mm
  • Reset Point: 1.8 mm; Pressure Point: 1.7 mm
  • Top Housing: Polycarbonate (clear V1; smoky translucent V2)
  • Bottom Housing: Nylon PA66 (V1) / POM (V2 per DIYKey)
  • Stem: POM, white-colored, BOX-enclosed cross design
  • Spring: Spring steel; 20 mm (V2 per MKBGuide) / 15.2 mm (V2 per DIYKey — conflicting)
  • Contacts: 18K gold-plated crosspoint
  • Pin Count: 3-pin plate mount (V1); 5-pin PCB mount clippable to 3-pin (V2)
  • IP Rating: IP56 (V1); IP54 (V2 per MKBGuide — note: other V2 sources do not confirm this downgrade)
  • LED Compatibility: SMD only (V1 IP56 sealed design); V2 supports SMD and through-hole per some sources
  • Lifespan: 80 million cycles (consistent across all sources; no credible 50M figure found for BOX White)
  • Operating Temperature: -10°C to +70°C
  • Keycap Compatibility: Cherry MX cross-stem compatible (post-V1 fix)
  • Factory Lubrication: None (V1); click-bar factory-lubricated (V2 per DIYKey)
  • Retail Price: $0.30–$0.39 per switch

5. Ordering & Compatibility

The BOX White is available through consumer specialty retailers: MechanicalKeyboards.com (~$0.35/switch, 5-pin V2), KPRepublic (~$4.45/pack), MaxGaming (€0.39/switch), DIYKey.net ($0.33/switch), KBDfans, and NovelKeys. It does not appear in Mouser, Digi-Key, or Arrow catalogs under any CPG1511 variant — Kailh BOX switches are exclusively consumer/hobbyist channel. Stock fluctuates; several retailers listed "out of stock" at time of research. Compatible with standard Cherry MX hot-swap sockets (3-pin) and most PCBs supporting 5-pin (V2 clippable). Not compatible with Alps, Topre, or other non-MX mounting standards. Clicky hierarchy siblings: BOX Jade (heavier click bar, ~50 gf), BOX Pale Blue (60 gf, standard click bar), BOX Navy (60 gf, thick click bar + heavy spring, ~75–90 gf bottom-out).


6. Known Issues

V1 Stem-Cracking (resolved): V1 BOX switches shipped with stems measuring 1.32 mm ± 0.02 mm (max 1.34 mm) due to a spec change requested by Dareu, compared to standard MX at ~1.26–1.27 mm. This cracked GMK and some Maxkey SA keycap stems, particularly when caps were swapped between boards. Kaihua publicly acknowledged the issue in August 2018 and corrected production to 1.30 mm ± 0.02 mm by removing stem nibs. All post-fall 2018 stock (V2) uses the corrected dimension. Community workarounds for V1 units included the Stemshaver and Cruciformer mod tools. Data-quality flags: (a) CPG1511 is a family code, not a White-specific PN; retail slug "CPG1511-WHITE" has no authorized-distributor match. (b) Actuation force varies across sources: 45 gf (Kailh official) vs 50 gf (early Kailh WordPress, some retailers) — likely reflects V1 vs V2 spec revision or tolerance presentation difference. (c) JLCPCB classifies CPG1511F01S03 as "Brown Switch" — probable database error. (d) Spring length conflicting: 20 mm (MKBGuide) vs 15.2 mm (DIYKey) for V2. (e) IP rating: V2 listed as IP56 by most sources but IP54 by MKBGuide — unconfirmed. No credible source supports a 50M lifespan claim for this switch.


17 sources
  1. Kailh BOX White – KeebWorks — keebworks.com
  2. Kailh BOX V2 White 45g Clicky PCB Mount Switch — mechanicalkeyboards.com
  3. Kailh Box Switches Complete Guide: Every Switch Compared (2026) | MKB Guide — mkbguide.com
  4. Kailh Switches: A Comprehensive Guide | Switch and Click — switchandclick.com
  5. Unpacking The Kailh Box Switch Debacle — kailhswitch.com
  6. Kailh BOX Switches Crack and Stress Keycap Stems – GeekhHack — geekhack.org
  7. IP56 water resistant Kailh Box Switches – Kaihua Electronics — kailhswitch.wordpress.com
  8. Kailh BOX V2 White Switches – Clicky – Crisp Click & Confident Control — rgbkeys.com
  9. Kailh BOX White Switches {Review and Complete GUIDE!} — techbullish.com
  10. Kailh Box Switch Set – Kailh switch (official) — kailh.net
  11. Kailh Box Black Red Brown White RGB SMD Switches Dustproof IP56 – KPRepublic — kprepublic.com
  12. Kailh Box White Clicky Switch – MaxGaming — maxgaming.com
  13. CPG1511F01S03 | Kailh | Mechanical Keyboard Shaft | JLCPCB — jlcpcb.com
  14. Kailh BOX V2 White Clicky Switch | 45gf Click-Bar · 80M Cycles · 5-Pin — diykey.net
  15. Kailh Box White V2: Clicky Switch Review | Medium — medium.com
  16. A Comprehensive Overview of Kailh Switches – Hirosart — hirosarts.com
  17. Kailh Box Switches Buying Guide – Kailh switch (official blog) — kailh.net

Specifications

Actuation Force
50g
Color
White stem
Mechanical Life
50,000,000 cycles
Mounting Type
Choc low-profile PCB mount
Travel Distance
1.5mm actuation, 3mm total

Installation Quick Reference

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensions

Troubleshooting

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Where to Buy

Price range

$4.97 — $79.13

across 2 sellers in US dollars

Quick Specs

Actuation Force
50g
Color
White stem
Mechanical Life
50,000,000 cycles
Mounting Type
Choc low-profile PCB mount
Travel Distance
1.5mm actuation, 3mm total

What People Are Saying

•

“Clicky version of the Choc low-profile switch. Audible click in a slim 3mm travel package. Used in slim keyboards that want tactile+audible feedback.”

Reddit r/MechanicalKeyboards 20 upvotes View thread →