QanBa 24mm Snap In Translucent Arcade Button. This button is very similar to the Sanwa OBSC-24 and is used in QanBa's Arcade Sticks and Fighsticks.
Specifications
|
Arcade express id
|
758
|
|
Device type
|
Qanba 24mm snap-in translucent arcade pushbutton
|
|
Diameter
|
24mm
|
|
Finish
|
Translucent plunger
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Snap-in
|
|
Reference pn
|
Qanba 24mm snap-in translucent (AX-758 is an Arcade Express catalog ID)
|
|
Weight kg
|
0.010000
|
Installation Quick Reference
Mounting: Snap-in buttons push into a 24mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
Dimensions
Troubleshooting
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Quick Specs
- Arcade express id
- 758
- Device type
- Qanba 24mm snap-in translucent arcade pushbutton
- Diameter
- 24mm
- Finish
- Translucent plunger
- Mounting Type
- Snap-in
