Sanwa OBSN-30 screw in japanese arcade pushbutton. Ideal for wooden panels with up to 8mm base width.
Specifications
|
Arcade express id
|
303
|
|
Device type
|
Sanwa OBSN-30 30mm screw-in arcade button (screw-in variant of OBSF-30, for thick panels)
|
|
Diameter
|
30mm
|
|
Microswitch Type
The internal switch mechanism. Built-in = sealed unit. Cherry D44X = replaceable, clicky. Omron = quieter, longer life.
|
Built-in Sanwa microswitch
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Screw-in (threaded barrel + nut)
|
|
Reference pn
|
OBSN-30 (AX-303 is an Arcade Express catalog ID)
|
|
Weight kg
|
0.020000
|
Installation Quick Reference
Mounting: Snap-in buttons push into a 30mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
Dimensions
Troubleshooting
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Quick Specs
- Arcade express id
- 303
- Device type
- Sanwa OBSN-30 30mm screw-in arcade button (screw-in variant of OBSF-30, for thick panels)
- Diameter
- 30mm
- Microswitch Type
- Built-in Sanwa microswitch
- Mounting Type
- Screw-in (threaded barrel + nut)
