Series picture: the seller uses it for 10 other parts too, so it may not show this exact version.
Pushbutton Switches Keypad 4PST 1 btn Non-Illum. Gray
Research Notes
1. What this is
82-101-74 is a Grayhill rotary/DIP switch.
2. Part-number decode
- Series: Grayhill rotary/DIP
- Type: rotary/DIP switch
3. Compatibility & ordering
Grayhill makes rotary switches, DIP switches, keypads, and optical encoders. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.
4. Data-quality note
The Grayhill product line/type is identified; the detailed configuration is left to the datasheet rather than guessed. Flagged decoded-partial.
5. Sources
- Grayhill product catalog (grayhill.com)
- Distributor listing (DigiKey / Mouser) — search the exact part number
1 source
- Grayhill — 82-101-74 — grayhill.com
Specifications
|
Device class
|
rotary/DIP switch
|
|
Enriched by
|
grayhill-decoder-2026-08-12
|
|
Lead time
|
84 Days
|
|
Manufacturer series
|
rotary/DIP
|
|
Mouser part number
|
706-82-101-74
|
|
Pn status
|
decoded-partial
|
|
Rohs status
|
RoHS Compliant
|
|
Series description
|
Grayhill rotary or DIP configuration switch (82/26/56-series)
|
Installation Quick Reference
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Troubleshooting
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Where to Buy
Quick Specs
- Device class
- rotary/DIP switch
- Enriched by
- grayhill-decoder-2026-08-12
- Lead time
- 84 Days
- Manufacturer series
- rotary/DIP
- Mouser part number
- 706-82-101-74