800F-3ASM2A2
Active800F 3-Position Selector Hand/Off/Auto
Allen-Bradley 800F 3-position selector with spring return to center.
Common Applications
The standard AB Hand/Off/Auto selector. Center position (Off) is spring return — releasing the handle always returns to Off. Hand = manual run. Auto = PLC controlled. The most common selector on AB pump and HVAC panels.
Specifications
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Spring return to center
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
2x 1NO
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
IP Rating
IP66: Dust-tight and withstands powerful water jets from any direction. Standard for outdoor and washdown applications.
|
IP66
|
Installation Quick Reference
Panel cutout: 22mm. Align the selector positions with the desired panel markings before tightening.
Contact blocks: Attach one contact block per position. Wire each to a separate PLC input for position feedback. A 2-position switch needs 1-2 blocks; 3-position needs 2-3.
Dimensions
Wiring Diagram
Troubleshooting
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Where to Buy
Price range
$44.57 — $51.87
across 2 distributors
Quick Specs
- Actuator Function
- Spring return to center
- Certifications
- UL, CSA, CE
- Contact Configuration
- 2x 1NO
- Cutout Diameter
- 22mm
- IP Rating
- IP66
What People Are Saying
“The standard AB Hand/Off/Auto selector. Center position (Off) is spring return — releasing the handle always returns to Off. Hand = manual run. Auto = PLC controlled. The most common selector on AB pu”