2F212

Active

Honeywell 2F212

Honeywell 2F212 — Honeywell 2F212

Pushbutton Switches UNSEALED OI

Research Notes

1. What this is

2F212 is a Honeywell Honeywell component — line not recognized.

2. Part-number decode

  • Series: Honeywell Honeywell (line not recognized)
  • Type: switch

3. Compatibility & ordering

Honeywell (incl. MICRO SWITCH) makes AML pushbuttons/indicators and snap-action/basic switches. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.

4. Data-quality note

The exact Honeywell product line/configuration could not be confidently decoded from this part number. Kept and documented; flagged needs-verification.

5. Sources

  • Honeywell product catalog (sps.honeywell.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

1 source
  1. Honeywell — 2F212 — sps.honeywell.com

Specifications

Enriched by
honeywell-decoder-2026-08-12
Lead time
189 Days
Manufacturer series
Honeywell (line not recognized)
Mouser part number
785-2F212
Pn status
needs-verification
Rohs status
Series description
Honeywell switch component — exact line/config could not be decoded from this part number; kept and flagged for verification

Installation Quick Reference

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensions

Troubleshooting

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Photos & Drawings

Images: mouser.com

Quick Specs

Enriched by
honeywell-decoder-2026-08-12
Lead time
189 Days
Manufacturer series
Honeywell (line not recognized)
Mouser part number
785-2F212
Pn status
needs-verification