Series picture: the seller uses it for 9 other parts too, so it may not show this exact version.
Push-button Enclosures N12 Hinged PB Encl - 9 PB x 22.5mm - 10.50 x 9.50 x 6.00" - Steel/Gray
Research Notes
1. What this is
1489MP9 ("Hammond Manufacturing 1489MP9") is catalogued as a push-button / switch device from Hammond Manufacturing.
2. What we know
- Manufacturer: Hammond Manufacturing
- Category: push-button / switch device
- Part number / name: 1489MP9 — Hammond Manufacturing 1489MP9
- Hammond Manufacturing — electronics ENCLOSURES, racks, and transformers (a Hammond part is usually an enclosure/box, not a switch)
3. How to identify / order the exact part
The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the Hammond Manufacturing catalog for this part number on the manufacturer site or a distributor (DigiKey / Mouser / RS).
4. Data-quality note
This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged needs-verification.
5. Sources
- Hammond Manufacturing product catalog — search "1489MP9" / "Hammond Manufacturing 1489MP9"
Verified distributor data (Mouser)
- Official distributor description: Push-button Enclosures N12 Hinged PB Encl - 9 PB x 22.5mm - 10.50 x 9.50 x 6.00" - Steel/Gray
- Datasheet: https://www.mouser.com/datasheet/3/222/1/1489.pdf
- Price (from): 224.74 EUR
- Availability: Check Mouser for availability
This part is carried by Mouser Electronics; the description and datasheet above come straight from the distributor's catalog, confirming and expanding the part-number decode above.
1 source
- Hammond Manufacturing 1489MP9 — distributor/catalog
Specifications
|
Datasheet url
|
https://www.mouser.com/datasheet/3/222/1/1489.pdf
|
|
Device class
|
push-button
|
|
Enriched by
|
generic-fallback-2026-08-12
|
|
Lead time
|
0 Days
|
|
Mouser checked
|
2026-09-28
|
|
Mouser description
|
Push-button Enclosures N12 Hinged PB Encl - 9 PB x 22.5mm - 10.50 x 9.50 x 6.00" - Steel/Gray
|
|
Mouser matched
|
true
|
|
Mouser part number
|
546-1489MP9
|
|
Pn status
|
verified
|
|
Rohs status
|
RoHS Compliant
|
Installation Quick Reference
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Troubleshooting
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Where to Buy
Quick Specs
- Datasheet url
- https://www.mouser.com/datasheet/3/222/1/1489.pdf
- Device class
- push-button
- Enriched by
- generic-fallback-2026-08-12
- Lead time
- 0 Days
- Mouser checked
- 2026-09-28